PIC18F46K22 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
High Performance RISC CPU:
C Compiler optimized architecture/instruction set
Data EEPROM to 1024 bytes
Linear program memory addressing to 64 Kbytes
Linear data memory addressing to 4 Kbytes
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 Single-Cycle Hardware MultiplierExtreme Low-Power Managementwith nanoWatt XLP™:
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHzFlexible Oscillator Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated to ± 1%- Software selectable frequencies range of31 kHz to 16 MHz- 64 MHz performance available using PLL –no external components required
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral clockstops
Two-Speed Oscillator Start-upSpecial Microcontroller Features:
Full 5.5V operation (PIC18F2XK22/4XK22)
Low voltage option available for 1.8V-3.6V operation(PIC18LF2XK22/4XK22)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT)and Oscillator Start-up Timer (OST)
Programmable Brown-out Reset (BOR)
Extended Watchdog Timer (WDT) with on-chiposcillator and software enable
Programmable code protection
In-Circuit Serial Programming™ (ICSP™) viatwo pins
In-Circuit Debug via two pinsAnalog Features:
Analog-to-Digital Converter (ADC) module:- 10-bit resolution- 17 analog input channels (PIC18F/LF2XK22)- 28 analog input channels (PIC18F/LF4XK22)- Auto acquisition capability- Conversion available during Sleep
Programmable High/Low Voltage Detection(PLVD) module
Charge Time Measurement Unit (CTMU) formTouch™ support:- Up to 28 channels for button, sensor or sliderinput
Analog comparator module with:- Two rail-to-rail analog comparators- Comparator inputs and outputs externallyaccessible and configurable
Voltage reference module with:- Programmable On-chip Voltage Reference(CVREF) module (% of VDD)- Selectable on-chip fixed voltage referencePeripheral Features:
24/35 I/O pins and 1 input-only pin:- High current sink/source 25 mA/25 mA- Individually programmable weak pull-ups- Individually programmable interrupt-on-pinchange
Three external interrupt pins
Up to seven Timer modules:- Up to four 16-bit timers/counters with prescaler- Up to three 8-bit timers/counters- Dedicated, low-power Timer1 oscillator
Up to two Capture/Compare/PWM (CCP) modules
Up to three Enhanced Capture/Compare/PWM(ECCP) modules with:- One, two or four PWM outputs- Selectable polarity- Programmable dead time- Auto-shutdown and Auto-restart- PWM output steering control
Tuesday, September 25, 2012
PIC18F26K22 MCU CRACK
PIC18F26K22 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
High Performance RISC CPU:
C Compiler optimized architecture/instruction set
Data EEPROM to 1024 bytes
Linear program memory addressing to 64 Kbytes
Linear data memory addressing to 4 Kbytes
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 Single-Cycle Hardware MultiplierExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHzFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops
Two-Speed Oscillator Start-upSpecial Microcontroller Features:
Full 5.5V operation (PIC18F2XK22/4XK22)
Low voltage option available for 1.8V-3.6V operation
(PIC18LF2XK22/4XK22)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT)and Oscillator Start
-up Timer (OST)
Programmable Brown-out Reset (BOR)
Extended Watchdog Timer (WDT) with on-chiposcillator and
software enable
Programmable code protection
In-Circuit Serial Programming™ (ICSP™) viatwo pins
In-Circuit Debug via two pinsAnalog Features:
Analog-to-Digital Converter (ADC) module:- 10-bit resolution- 17
analog input channels (PIC18F/LF2XK22)- 28 analog input channels
(PIC18F/LF4XK22)- Auto acquisition capability- Conversion
available during Sleep
Programmable High/Low Voltage Detection(PLVD) module
Charge Time Measurement Unit (CTMU) formTouch™ support:- Up to
28 channels for button, sensor or sliderinput
Analog comparator module with:- Two rail-to-rail analog
comparators- Comparator inputs and outputs externallyaccessible
and configurable
Voltage reference module with:- Programmable On-chip Voltage
Reference(CVREF) module (% of VDD)- Selectable on-chip fixed
voltage referencePeripheral Features:
24/35 I/O pins and 1 input-only pin:- High current sink/source
25 mA/25 mA- Individually programmable weak pull-ups-
Individually programmable interrupt-on-pinchange
Three external interrupt pins
Up to seven Timer modules:- Up to four 16-bit timers/counters
with prescaler- Up to three 8-bit timers/counters- Dedicated,
low-power Timer1 oscillator
Up to two Capture/Compare/PWM (CCP) modules
Up to three Enhanced Capture/Compare/PWM(ECCP) modules with:-
One, two or four PWM outputs- Selectable polarity- Programmable
dead time- Auto-shutdown and Auto-restart- PWM output steering
control
Two Master Synchronous Serial Port (MSSP)modules with two modes
of operation:- 3-wire SPI (supports all 4 SPI modes)- I2C™
Master and Slave modes (Slave modewith address masking)
Two Enhanced Universal Synchronous AsynchronousReceiver
Transmitter modules (EUSART):- Supports RS-232, RS-485 and LIN
2.0- Auto-Baud Detect- Auto Wake-up on Start bit
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
High Performance RISC CPU:
C Compiler optimized architecture/instruction set
Data EEPROM to 1024 bytes
Linear program memory addressing to 64 Kbytes
Linear data memory addressing to 4 Kbytes
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 Single-Cycle Hardware MultiplierExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHzFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops
Two-Speed Oscillator Start-upSpecial Microcontroller Features:
Full 5.5V operation (PIC18F2XK22/4XK22)
Low voltage option available for 1.8V-3.6V operation
(PIC18LF2XK22/4XK22)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT)and Oscillator Start
-up Timer (OST)
Programmable Brown-out Reset (BOR)
Extended Watchdog Timer (WDT) with on-chiposcillator and
software enable
Programmable code protection
In-Circuit Serial Programming™ (ICSP™) viatwo pins
In-Circuit Debug via two pinsAnalog Features:
Analog-to-Digital Converter (ADC) module:- 10-bit resolution- 17
analog input channels (PIC18F/LF2XK22)- 28 analog input channels
(PIC18F/LF4XK22)- Auto acquisition capability- Conversion
available during Sleep
Programmable High/Low Voltage Detection(PLVD) module
Charge Time Measurement Unit (CTMU) formTouch™ support:- Up to
28 channels for button, sensor or sliderinput
Analog comparator module with:- Two rail-to-rail analog
comparators- Comparator inputs and outputs externallyaccessible
and configurable
Voltage reference module with:- Programmable On-chip Voltage
Reference(CVREF) module (% of VDD)- Selectable on-chip fixed
voltage referencePeripheral Features:
24/35 I/O pins and 1 input-only pin:- High current sink/source
25 mA/25 mA- Individually programmable weak pull-ups-
Individually programmable interrupt-on-pinchange
Three external interrupt pins
Up to seven Timer modules:- Up to four 16-bit timers/counters
with prescaler- Up to three 8-bit timers/counters- Dedicated,
low-power Timer1 oscillator
Up to two Capture/Compare/PWM (CCP) modules
Up to three Enhanced Capture/Compare/PWM(ECCP) modules with:-
One, two or four PWM outputs- Selectable polarity- Programmable
dead time- Auto-shutdown and Auto-restart- PWM output steering
control
Two Master Synchronous Serial Port (MSSP)modules with two modes
of operation:- 3-wire SPI (supports all 4 SPI modes)- I2C™
Master and Slave modes (Slave modewith address masking)
Two Enhanced Universal Synchronous AsynchronousReceiver
Transmitter modules (EUSART):- Supports RS-232, RS-485 and LIN
2.0- Auto-Baud Detect- Auto Wake-up on Start bit
PIC18F25K80 MCU CRACK
PIC18F25K80 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
PIC18F25K80 is a high performance 8-bit MCU with Integrated
ECAN™ featuring eXtreme Low Power consumption. New features in
PIC18F25K80 include low sleep current for low power application,
1.8V to 5.5V operating voltage for automotive, building control,
elevator control and industrial application, Timers/Enhanced
Compare/Capture/PWMs for precision timing control, 12-bit ADC
for advance analog interface and Charge Time Measurement Unit
for easy capacitive touch user interface. The PIC18F25K80 family
is ideal for applications requiring cost-effective, low-power
CAN solutions with high performance and robust peripheral set in
small package.
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
PIC18F25K80 is a high performance 8-bit MCU with Integrated
ECAN™ featuring eXtreme Low Power consumption. New features in
PIC18F25K80 include low sleep current for low power application,
1.8V to 5.5V operating voltage for automotive, building control,
elevator control and industrial application, Timers/Enhanced
Compare/Capture/PWMs for precision timing control, 12-bit ADC
for advance analog interface and Charge Time Measurement Unit
for easy capacitive touch user interface. The PIC18F25K80 family
is ideal for applications requiring cost-effective, low-power
CAN solutions with high performance and robust peripheral set in
small package.
PIC18F45K22 MCU CRACK
PIC18F45K22 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
High Performance RISC CPU:
C Compiler optimized architecture/instruction set
Data EEPROM to 1024 bytes
Linear program memory addressing to 64 Kbytes
Linear data memory addressing to 4 Kbytes
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 Single-Cycle Hardware MultiplierExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHzFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops
Two-Speed Oscillator Start-upSpecial Microcontroller Features:
Full 5.5V operation (PIC18F2XK22/4XK22)
Low voltage option available for 1.8V-3.6V operation
(PIC18LF2XK22/4XK22)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT)and Oscillator Start
-up Timer (OST)
Programmable Brown-out Reset (BOR)
Extended Watchdog Timer (WDT) with on-chiposcillator and
software enable
Programmable code protection
In-Circuit Serial Programming™ (ICSP™) viatwo pins
In-Circuit Debug via two pinsAnalog Features:
Analog-to-Digital Converter (ADC) module:- 10-bit resolution- 17
analog input channels (PIC18F/LF2XK22)- 28 analog input channels
(PIC18F/LF4XK22)- Auto acquisition capability- Conversion
available during Sleep
Programmable High/Low Voltage Detection(PLVD) module
Charge Time Measurement Unit (CTMU) formTouch™ support:- Up to
28 channels for button, sensor or sliderinput
Analog comparator module with:- Two rail-to-rail analog
comparators- Comparator inputs and outputs externallyaccessible
and configurable
Voltage reference module with:- Programmable On-chip Voltage
Reference(CVREF) module (% of VDD)- Selectable on-chip fixed
voltage referencePeripheral Features:
24/35 I/O pins and 1 input-only pin:- High current sink/source
25 mA/25 mA- Individually programmable weak pull-ups-
Individually programmable interrupt-on-pinchange
Three external interrupt pins
Up to seven Timer modules:- Up to four 16-bit timers/counters
with prescaler- Up to three 8-bit timers/counters- Dedicated,
low-power Timer1 oscillator
Up to two Capture/Compare/PWM (CCP) modules
Up to three Enhanced Capture/Compare/PWM(ECCP) modules with:-
One, two or four PWM outputs- Selectable polarity- Programmable
dead time- Auto-shutdown and Auto-restart- PWM output steering
control
Two Master Synchronous Serial Port (MSSP)modules with two modes
of operation:- 3-wire SPI (supports all 4 SPI modes)- I2C™
Master and Slave modes (Slave modewith address masking)
Two Enhanced Universal Synchronous AsynchronousReceiver
Transmitter modules (EUSART):- Supports RS-232, RS-485 and LIN
2.0- Auto-Baud Detect- Auto Wake-up on Start bit
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
High Performance RISC CPU:
C Compiler optimized architecture/instruction set
Data EEPROM to 1024 bytes
Linear program memory addressing to 64 Kbytes
Linear data memory addressing to 4 Kbytes
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 Single-Cycle Hardware MultiplierExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA, typical
Watchdog Timer: 500 nA, typical
Timer1 Oscillator: 500 nA @ typical 32 kHzFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four Crystal modes up to 64 MHz
Two external Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops
Two-Speed Oscillator Start-upSpecial Microcontroller Features:
Full 5.5V operation (PIC18F2XK22/4XK22)
Low voltage option available for 1.8V-3.6V operation
(PIC18LF2XK22/4XK22)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT)and Oscillator Start
-up Timer (OST)
Programmable Brown-out Reset (BOR)
Extended Watchdog Timer (WDT) with on-chiposcillator and
software enable
Programmable code protection
In-Circuit Serial Programming™ (ICSP™) viatwo pins
In-Circuit Debug via two pinsAnalog Features:
Analog-to-Digital Converter (ADC) module:- 10-bit resolution- 17
analog input channels (PIC18F/LF2XK22)- 28 analog input channels
(PIC18F/LF4XK22)- Auto acquisition capability- Conversion
available during Sleep
Programmable High/Low Voltage Detection(PLVD) module
Charge Time Measurement Unit (CTMU) formTouch™ support:- Up to
28 channels for button, sensor or sliderinput
Analog comparator module with:- Two rail-to-rail analog
comparators- Comparator inputs and outputs externallyaccessible
and configurable
Voltage reference module with:- Programmable On-chip Voltage
Reference(CVREF) module (% of VDD)- Selectable on-chip fixed
voltage referencePeripheral Features:
24/35 I/O pins and 1 input-only pin:- High current sink/source
25 mA/25 mA- Individually programmable weak pull-ups-
Individually programmable interrupt-on-pinchange
Three external interrupt pins
Up to seven Timer modules:- Up to four 16-bit timers/counters
with prescaler- Up to three 8-bit timers/counters- Dedicated,
low-power Timer1 oscillator
Up to two Capture/Compare/PWM (CCP) modules
Up to three Enhanced Capture/Compare/PWM(ECCP) modules with:-
One, two or four PWM outputs- Selectable polarity- Programmable
dead time- Auto-shutdown and Auto-restart- PWM output steering
control
Two Master Synchronous Serial Port (MSSP)modules with two modes
of operation:- 3-wire SPI (supports all 4 SPI modes)- I2C™
Master and Slave modes (Slave modewith address masking)
Two Enhanced Universal Synchronous AsynchronousReceiver
Transmitter modules (EUSART):- Supports RS-232, RS-485 and LIN
2.0- Auto-Baud Detect- Auto Wake-up on Start bit
PIC18F46K20 MCU CRACK
PIC18F46K20 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
High Performance RISC CPU:
C Compiler Optimized Architecture:- Optional extended
instruction set designed tooptimize re-entrant code
Up to 1024 bytes Data EEPROM
Up to 64 Kbytes Linear program memoryaddressing
Up to 3936 bytes Linear data memory addressing
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 single-cycle hardware multiplierFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four crystal modes up to 64 MHz
Two external clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops- Two-Speed Oscillator Start-upSpecial Microcontroller
Features:
Operating Voltage Range: 1.8V to 3.6V
Self-Programmable under Software Control
Programmable 16-Level High/Low-VoltageDetection (HLVD) module:-
Interrupt on High/Low-Voltage Detection
Programmable Brown-out Reset (BOR):- With software enable option
Extended Watchdog Timer (WDT):- Programmable period from 4 ms to
131s
Single-Supply 3V In-Circuit SerialProgramming™ (ICSP™) via two
pins
In-Circuit Debug (ICD) via Two PinsExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA
Watchdog Timer: 500 nA
Timer1 Oscillator: 500 nA @ 32 kHzAnalog Features:
Analog-to-Digital Converter (ADC) module :- 10-bit resolution,
13 External Channels- Auto-acquisition capability- Conversion
available during Sleep- 1.2V Fixed Voltage Reference (FVR)
channel- Independent input multiplexing
Analog Comparator module:- Two rail-to-rail analog comparators-
Independent input multiplexing
Voltage Reference (CVREF) module- Programmable (% VDD), 16
steps- Two 16-level voltage ranges using VREF pinsPeripheral
Highlights:
Up to 35 I/O pins plus 1 input-only pin:- High-Current
Sink/Source 25 mA/25 mA- Three programmable external interrupts-
Four programmable interrupt-on-change- Eight programmable weak
pull-ups- Programmable slew rate
Capture/Compare/PWM (CCP) module
Enhanced CCP (ECCP) module:- One, two or four PWM outputs-
Selectable polarity- Programmable dead time- Auto-Shutdown and
Auto-Restart
Master Synchronous Serial Port (MSSP) module- 3-wire SPI
(supports all 4 modes)- I2C™ Master and Slave modes with
addressmask
Enhanced Universal Synchronous AsynchronousReceiver Transmitter
(EUSART) module:- Supports RS-485, RS-232 and LIN- RS-232
operation using internal oscillator- Auto-Wake-up on Break-
Auto-Baud Detect
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
High Performance RISC CPU:
C Compiler Optimized Architecture:- Optional extended
instruction set designed tooptimize re-entrant code
Up to 1024 bytes Data EEPROM
Up to 64 Kbytes Linear program memoryaddressing
Up to 3936 bytes Linear data memory addressing
Up to 16 MIPS operation
16-bit wide instructions, 8-bit wide data path
Priority levels for interrupts
31-level, software accessible hardware stack
8 x 8 single-cycle hardware multiplierFlexible Oscillator
Structure:
Precision 16 MHz internal oscillator block:- Factory calibrated
to ± 1%- Software selectable frequencies range of31 kHz to 16
MHz- 64 MHz performance available using PLL –no external
components required
Four crystal modes up to 64 MHz
Two external clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor:- Allows for safe shutdown if peripheral
clockstops- Two-Speed Oscillator Start-upSpecial Microcontroller
Features:
Operating Voltage Range: 1.8V to 3.6V
Self-Programmable under Software Control
Programmable 16-Level High/Low-VoltageDetection (HLVD) module:-
Interrupt on High/Low-Voltage Detection
Programmable Brown-out Reset (BOR):- With software enable option
Extended Watchdog Timer (WDT):- Programmable period from 4 ms to
131s
Single-Supply 3V In-Circuit SerialProgramming™ (ICSP™) via two
pins
In-Circuit Debug (ICD) via Two PinsExtreme Low-Power
Managementwith nanoWatt XLP™:
Sleep mode: 100 nA
Watchdog Timer: 500 nA
Timer1 Oscillator: 500 nA @ 32 kHzAnalog Features:
Analog-to-Digital Converter (ADC) module :- 10-bit resolution,
13 External Channels- Auto-acquisition capability- Conversion
available during Sleep- 1.2V Fixed Voltage Reference (FVR)
channel- Independent input multiplexing
Analog Comparator module:- Two rail-to-rail analog comparators-
Independent input multiplexing
Voltage Reference (CVREF) module- Programmable (% VDD), 16
steps- Two 16-level voltage ranges using VREF pinsPeripheral
Highlights:
Up to 35 I/O pins plus 1 input-only pin:- High-Current
Sink/Source 25 mA/25 mA- Three programmable external interrupts-
Four programmable interrupt-on-change- Eight programmable weak
pull-ups- Programmable slew rate
Capture/Compare/PWM (CCP) module
Enhanced CCP (ECCP) module:- One, two or four PWM outputs-
Selectable polarity- Programmable dead time- Auto-Shutdown and
Auto-Restart
Master Synchronous Serial Port (MSSP) module- 3-wire SPI
(supports all 4 modes)- I2C™ Master and Slave modes with
addressmask
Enhanced Universal Synchronous AsynchronousReceiver Transmitter
(EUSART) module:- Supports RS-485, RS-232 and LIN- RS-232
operation using internal oscillator- Auto-Wake-up on Break-
Auto-Baud Detect
PIC18F25K50 MCU CRACK
PIC18F25K50 MCU CRACK,microchip chip decrypt, chip code
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
Features
High performance PIC18 core with 8x8 Hardware Multiply
Flash Program Memory with self read/write capability
256 Bytes of integrated EEPROM
Internal 48MHz Oscillator with USB Accuracy -Via Active
Clock Tuning from USB Host
Universal Serial Bus 2.0 Module
Enhanced Capture Compare PWM (ECCP) Module with up to 4
outputs
Integrated Temperature Indicator Module
Up to 25 Channel 10-bit ADC with Voltage Reference
2 Analog Comparators
5-bit Digital to Analog Converter (DAC)
MI2C / SPI Module (MSSP)
Enhanced Addressable USART Module
Charge Time Measurement Unit (CTMU) for measurement
applications
25mA Source/Sink current I/O
2x 8-bit Timers
2x 16-bit Timers
Extended Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Low-Power Brown-Out Reset (LPBOR)
Programmable Brown-Out Reset (BOR)
In Circuit Serial Programming and Debug (ICSP/ICD)
PIC18LF2xK50 (1.8V – 3.6V) with nanoWatt XLP
PIC18F2xK50 (1.8V – 5.5V)
extraction, pic chip crack, pic chip clone, microchip chip
products clone.PCB cLone.
Features
High performance PIC18 core with 8x8 Hardware Multiply
Flash Program Memory with self read/write capability
256 Bytes of integrated EEPROM
Internal 48MHz Oscillator with USB Accuracy -Via Active
Clock Tuning from USB Host
Universal Serial Bus 2.0 Module
Enhanced Capture Compare PWM (ECCP) Module with up to 4
outputs
Integrated Temperature Indicator Module
Up to 25 Channel 10-bit ADC with Voltage Reference
2 Analog Comparators
5-bit Digital to Analog Converter (DAC)
MI2C / SPI Module (MSSP)
Enhanced Addressable USART Module
Charge Time Measurement Unit (CTMU) for measurement
applications
25mA Source/Sink current I/O
2x 8-bit Timers
2x 16-bit Timers
Extended Watchdog Timer (WDT)
Enhanced Power-On/Off-Reset
Low-Power Brown-Out Reset (LPBOR)
Programmable Brown-Out Reset (BOR)
In Circuit Serial Programming and Debug (ICSP/ICD)
PIC18LF2xK50 (1.8V – 3.6V) with nanoWatt XLP
PIC18F2xK50 (1.8V – 5.5V)
Thursday, September 13, 2012
Xeltek SuperPro 6000
Xeltek SuperPro 6000 Universal IC Chip Device Programmer
SKU SP6K
Weight 7.00 lbs
Highlights
80,500+ devices supported from 290 IC Manufacturers.
ARM9 32 Bit MCU + Linux for algorithm processing.
Programming speed up to 30% faster than SuperPro5000.
Supports NAND / eMMC devices up to 256 GB.
Stand-alone (no PC required) and PC hosted mode.
Built-in 144 universal pin-driver.
Comes with one-year customer request free device support.
CE and RoHS Compliant.
Expanded Features
Support devices with Vcc from 1.2V - 5V.
30% faster programming speed compared to SuperPro5000 with ARM9 MCU Processor + Linux ultra-fast algorithm processing engine.
Support files up to 256 GBytes.
Built with 144 universal pin-drivers. Universal adapters are available for various package types up to 144 pins. More efficient for new device support.
Stand-alone mode (No PC required) and PC hosted mode.
Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip.
Under stand-alone mode, the programmer is controlled via the 6-KEY keypad and the 20 character by 4 line LCD display.
A CF (compact flash) card is used to store the project files.
Cluster 1-15 units for flexible volume production. Operate multiple units to construct a concurrent multi-programming system.
ISP / ICP programming capability available via ISP / ICP adapter.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows XP / Vista / 7 32/64 bit
Only IC manufacturer approved programming algorithms used for high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Advanced and powerful software functions:
Production mode start chip operation the moment the chip is inserted properly.
Project function simplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.
Password for project files can be set for volume production control
Batch command combines device operations like Program, Verify,and Security into a single command at any sequence.
Serial numbers generators are available as standard or customer-specific functions.
Log file is useful for quality tracking.
Hardware & electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP.
PC interface: USB2.0 (High speed)
Stand-alone Feature: Supported, Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V / 2A
Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)
Items Included
SuperPro 6000 Programmer with a DIP48 Adapter
AC adapter
Software CD
USB2.0 Cable
Optional Accessories:
Socket adapters in various packages
CF card for stand-alone operation
ISP Header for serial programming
SKU SP6K
Weight 7.00 lbs
Highlights
80,500+ devices supported from 290 IC Manufacturers.
ARM9 32 Bit MCU + Linux for algorithm processing.
Programming speed up to 30% faster than SuperPro5000.
Supports NAND / eMMC devices up to 256 GB.
Stand-alone (no PC required) and PC hosted mode.
Built-in 144 universal pin-driver.
Comes with one-year customer request free device support.
CE and RoHS Compliant.
Expanded Features
Support devices with Vcc from 1.2V - 5V.
30% faster programming speed compared to SuperPro5000 with ARM9 MCU Processor + Linux ultra-fast algorithm processing engine.
Support files up to 256 GBytes.
Built with 144 universal pin-drivers. Universal adapters are available for various package types up to 144 pins. More efficient for new device support.
Stand-alone mode (No PC required) and PC hosted mode.
Under PC hosted mode the programmer is controlled by a PC via USB2.0 (high speed) to program a chip.
Under stand-alone mode, the programmer is controlled via the 6-KEY keypad and the 20 character by 4 line LCD display.
A CF (compact flash) card is used to store the project files.
Cluster 1-15 units for flexible volume production. Operate multiple units to construct a concurrent multi-programming system.
ISP / ICP programming capability available via ISP / ICP adapter.
Over-current and over-voltage protection for safety of the chip and programmer hardware.
Compatible with Windows XP / Vista / 7 32/64 bit
Only IC manufacturer approved programming algorithms used for high reliability.
Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability.
Advanced and powerful software functions:
Production mode start chip operation the moment the chip is inserted properly.
Project function simplifies processes such as Device Selection, File Loading, Device Configuration Setting, Program Option, and Batch File Setting into one step.
Password for project files can be set for volume production control
Batch command combines device operations like Program, Verify,and Security into a single command at any sequence.
Serial numbers generators are available as standard or customer-specific functions.
Log file is useful for quality tracking.
Hardware & electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP.
PC interface: USB2.0 (High speed)
Stand-alone Feature: Supported, Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V / 2A
Main unit: Dimensions 148(L) * 216(W) * 94(h) mm; Weight 3.5 lbs (1.6 Kg)
Package: Dimensions 301(L) * 252(W) * 145(H) mm; Weight 6.2 lbs (2.8Kg)
Items Included
SuperPro 6000 Programmer with a DIP48 Adapter
AC adapter
Software CD
USB2.0 Cable
Optional Accessories:
Socket adapters in various packages
CF card for stand-alone operation
ISP Header for serial programming
xeltek SuperPro 501S
xeltek SuperPro 501S Universal IC Chip Device Programmer
SKU SP501S
Weight 4.00 lbs
Number of Devices Supported 37,600+
Number of Manufacturers Supported 226
Number of Pins Available 48
Stand-Alone (PC-Free) Yes
Built-in Processor ARM7 RISC MCU
Free User Requested Device Update No
Windows Support Win XP/Vista/7 32/64 bit
RoHS & CE Compliance Yes
Warranty 2 Years
SKU SP501S
Weight 4.00 lbs
Number of Devices Supported 37,600+
Number of Manufacturers Supported 226
Number of Pins Available 48
Stand-Alone (PC-Free) Yes
Built-in Processor ARM7 RISC MCU
Free User Requested Device Update No
Windows Support Win XP/Vista/7 32/64 bit
RoHS & CE Compliance Yes
Warranty 2 Years
Highlights of 501s
Highlights
Lowest cost Stand-alone Programmer: With ARM7 MCU it gives ultra-fast programming experience.
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
Programs devices with Vcc as low as 1.2V
Built-in 48 universal pin drivers
CE and ROHS Compliant
Lowest cost Stand-alone Programmer: With ARM7 MCU it gives ultra-fast programming experience.
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
Programs devices with Vcc as low as 1.2V
Built-in 48 universal pin drivers
CE and ROHS Compliant
Hardware & electrical Specifications of 501s
Hardware & electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,…
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/2A
Main unit: Dimensions 205mm (L) * 148mm (W) * 50mm (H) Weight 1.35 lbs (0.6Kg)
Package: Dimensions 320mm (L) * 300mm (W) * 85mm (H) Weight 4lbs (1.8Kg)
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,…
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/2A
Main unit: Dimensions 205mm (L) * 148mm (W) * 50mm (H) Weight 1.35 lbs (0.6Kg)
Package: Dimensions 320mm (L) * 300mm (W) * 85mm (H) Weight 4lbs (1.8Kg)
xeltek SuperPro 501S Universal IC Chip Device Programmer
xeltek SuperPro 501S Universal IC Chip Device Programmer
SKU SP501S
Weight 4.00 lbs
Number of Devices Supported 37,600+
Number of Manufacturers Supported 226
Number of Pins Available 48
Stand-Alone (PC-Free) Yes
Built-in Processor ARM7 RISC MCU
Free User Requested Device Update No
Windows Support Win XP/Vista/7 32/64 bit
RoHS & CE Compliance Yes
Warranty 2 Years
Highlights
Lowest cost Stand-alone Programmer: With ARM7 MCU it gives ultra-fast programming experience.
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
Programs devices with Vcc as low as 1.2V
Built-in 48 universal pin drivers
CE and ROHS Compliant
Hardware & electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,…
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/2A
Main unit: Dimensions 205mm (L) * 148mm (W) * 50mm (H) Weight 1.35 lbs (0.6Kg)
Package: Dimensions 320mm (L) * 300mm (W) * 85mm (H) Weight 4lbs (1.8Kg)
SKU SP501S
Weight 4.00 lbs
Number of Devices Supported 37,600+
Number of Manufacturers Supported 226
Number of Pins Available 48
Stand-Alone (PC-Free) Yes
Built-in Processor ARM7 RISC MCU
Free User Requested Device Update No
Windows Support Win XP/Vista/7 32/64 bit
RoHS & CE Compliance Yes
Warranty 2 Years
Highlights
Lowest cost Stand-alone Programmer: With ARM7 MCU it gives ultra-fast programming experience.
Two programmers in one, a double value: PC mode for engineering and Stand-alone mode for production. The programmer operates in either PC hosted mode or stand-alone mode.
Under PC hosted mode, a PC controls the programmer via a high-speed USB connection to program a chip.
Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad.
A CF (compact flash) card stores the project files.
Programs devices with Vcc as low as 1.2V
Built-in 48 universal pin drivers
CE and ROHS Compliant
Hardware & electrical Specifications
Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU
Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,…
PC interface: USB2.0 (High speed)
Stand-alone memory: Compact FLASH Card
Power supply: AC Adapter: Input AC 90V- 250V; Output: 12V/2A
Main unit: Dimensions 205mm (L) * 148mm (W) * 50mm (H) Weight 1.35 lbs (0.6Kg)
Package: Dimensions 320mm (L) * 300mm (W) * 85mm (H) Weight 4lbs (1.8Kg)
Tuesday, September 11, 2012
ATxmega384D3 MCU code extraction
ATxmega384D3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 384KB in-system programmable flash memory (8KB boot code section) with read-while-write capabilities, 4KB EEPROM, 32KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with compare, compare and PWM channels, three USARTs, two two-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit ADC programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 384KB in-system programmable flash memory (8KB boot code section) with read-while-write capabilities, 4KB EEPROM, 32KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with compare, compare and PWM channels, three USARTs, two two-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit ADC programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection.
ATxmega64A1 MCU code extraction
ATxmega64A1 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The AVR XMEGA A1 series features 100-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The AVR XMEGA A1 series features 100-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
ATxmega64A1U MCU code extraction
ATxmega64A1U MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The AVR XMEGA A1U series features 100-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The AVR XMEGA A1U series features 100-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
ATxmega64A3 MCU code extraction
ATxmega64A3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
ATxmega64A3U MCU code extraction
ATxmega64A3U MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A3 series features 64-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
ATxmega64A4U MCU code extraction
ATxmega64A4U MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A4U series features 44-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, external bus interface, 4-channel DMA controller, 8-channel event system, and up to 32 MIPS throughput at 32MHz. The ATxmega A4U series features 44-pin packages.
The device can be used in a wide range of applications, such as building, industrial, motor, board, and climate control; hand-held battery applications; factory automation; power tools; HVAC; networking, metering, large home appliances, and optical and medical devices.
ATxmega64B1 MCU code extraction
ATxmega64B1 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 8KB boot code section, 8KB SRAM, 2048-Byte EEPROM, 2-channel DMA controller, 4-channel event system, USB Full speed Device, 4x40 segment LCD controller and up to 32 MIPS throughput at 32MHz. The ATxmega B3 series features 100-pin packages.
The device can be used in a wide range of applications, such as Utility Metering, Home Automation, Climate Control, Industrial Control, Sports equipment, Toys, eToken, Medical, USB connectivity, Power tools and Fire alarm systems.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 8KB boot code section, 8KB SRAM, 2048-Byte EEPROM, 2-channel DMA controller, 4-channel event system, USB Full speed Device, 4x40 segment LCD controller and up to 32 MIPS throughput at 32MHz. The ATxmega B3 series features 100-pin packages.
The device can be used in a wide range of applications, such as Utility Metering, Home Automation, Climate Control, Industrial Control, Sports equipment, Toys, eToken, Medical, USB connectivity, Power tools and Fire alarm systems.
ATxmega64B3 MCU code extraction
ATxmega64B3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, 2-channel DMA controller, 4-channel event system, USB Full speed Device, 4x25 segment LCD controller and up to 32 MIPS throughput at 32MHz. The ATxmega B3 series features 64-pin packages.
The device can be used in a wide range of applications, such as Utility Metering, Home Automation, Climate Control, Industrial Control, Sports equipment, Toys, eToken, Medical, USB connectivity, Power tools and Fire alarm systems.
Low power, high performance 8/16-bit AVR microcontroller featuring 64KB self-programming flash program memory, 4KB boot code section, 4KB SRAM, 2048-Byte EEPROM, 2-channel DMA controller, 4-channel event system, USB Full speed Device, 4x25 segment LCD controller and up to 32 MIPS throughput at 32MHz. The ATxmega B3 series features 64-pin packages.
The device can be used in a wide range of applications, such as Utility Metering, Home Automation, Climate Control, Industrial Control, Sports equipment, Toys, eToken, Medical, USB connectivity, Power tools and Fire alarm systems.
ATxmega64C3 MCU code extraction
ATxmega64C3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 64KB in-system programmable flash memory (8KB boot code section) with read-while-write capabilities, 2KB EEPROM, 4KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with capture, compare and PWM channels, USB Full-speed Device, three USARTs, two two-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit ADC with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 64KB in-system programmable flash memory (8KB boot code section) with read-while-write capabilities, 2KB EEPROM, 4KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with capture, compare and PWM channels, USB Full-speed Device, three USARTs, two two-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit ADC with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection.
ATxmega64D3 MCU code extraction
ATxmega64D3 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 64KB ISP flash memory (4KB boot code section) with read-while-write capabilities, 2KB EEPROM, 4KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with compare modes and PWM, three USARTs, two 2-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection. The Program and Debug Interface (PDI), a fast 2-pin interface for programming and debugging, is available. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 64KB ISP flash memory (4KB boot code section) with read-while-write capabilities, 2KB EEPROM, 4KB SRAM, a four-channel event system, a programmable multi-level interrupt controller, 50 general purpose I/O lines, a 16-bit real time counter, five flexible 16-bit timer/counters with compare modes and PWM, three USARTs, two 2-wire interfaces, two serial peripheral interfaces, one 16-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and a programmable brown-out detection. The Program and Debug Interface (PDI), a fast 2-pin interface for programming and debugging, is available. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
ATxmega64D4 MCU code extraction
ATxmega64D4 MCU code extraction, Chip decryption, MCU code extraction,Atmel IC reverse, atmel DSP Crack, PCB cloning ,PCB copying.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 64KB ISP flash memory (4KB boot code section) with read-while-write capabilities, 2KB EEPROM, 4KB SRAM, four-channel event system, a programmable multi-level interrupt controller, 34 general purpose I/O lines, a 16-bit real time counter, four flexible 16-bit timer/counters with compare modes and PWM, two USARTs, two Two-Wire Interfaces (TWIs), two Serial Peripheral Interfaces (SPIs), one 12-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and programmable brown-out detection. The Program and Debug Interface (PDI), a fast 2-pin interface for programming and debugging, is available. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
The high-performance, low-power 8/16-bit AVR XMEGA microcontroller combines 64KB ISP flash memory (4KB boot code section) with read-while-write capabilities, 2KB EEPROM, 4KB SRAM, four-channel event system, a programmable multi-level interrupt controller, 34 general purpose I/O lines, a 16-bit real time counter, four flexible 16-bit timer/counters with compare modes and PWM, two USARTs, two Two-Wire Interfaces (TWIs), two Serial Peripheral Interfaces (SPIs), one 12-channel/12-bit A/D converter with optional differential input with programmable gain, two analog comparators with window mode, a programmable watchdog timer with separate internal oscillator, accurate internal oscillators with PLL and prescaler, and programmable brown-out detection. The Program and Debug Interface (PDI), a fast 2-pin interface for programming and debugging, is available. By executing powerful instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.
Subscribe to:
Posts (Atom)