Monday, November 19, 2012

LPC2102FBD48 Microcontroller crack

LPC2102FBD48 Microcontroller crack, NXP mcu crack, NXP chip decryption
LPC2101FBD48,Single-chip 16-bit/32-bit microcontrollers; 8 kB/16 kB/32 kB flash with ISP/IAP, fast ports and 10-bit ADC

Key features
16-bit/32-bit ARM7TDMI-S microcontroller in tiny LQFP48 and HVQFN48 packages.
2 kB/4 kB/8 kB of on-chip static RAM and 8 kB/16 kB/32 kB of on-chip flash program memory. 128-bit wide interface/accelerator enables high-speed 70 MHz operation.
ISP/IAP via on-chip bootloader software. Single flash sector or full chip erase in 100 ms and programming of 256 bytes in 1 ms.
EmbeddedICE-RT offers real-time debugging with the on-chip RealMonitor software.
The 10-bit ADC provides eight analog inputs, with conversion times as low as 2.44 us per channel and dedicated result registers to minimize interrupt overhead.
Two 32-bit timers/external event counters with combined seven capture and seven compare channels.
Two 16-bit timers/external event counters with combined three capture and seven compare channels.
Low power Real-Time Clock (RTC) with independent power and dedicated 32 kHz clock input.
Multiple serial interfaces including two UARTs (16C550), two Fast I2C-buses (400 kbit/s), SPI and SSP with buffering and variable data length capabilities.
Vectored interrupt controller with configurable priorities and vector addresses.
Up to thirty-two, 5 V tolerant fast general purpose I/O pins.
Up to 13 edge or level sensitive external interrupt pins available.
70 MHz maximum CPU clock available from programmable on-chip PLL with a possible input frequency of 10 MHz to 25 MHz and a settling time of 100 us.
On-chip integrated oscillator operates with an external crystal in the range from 1 MHz to 25 MHz.
Power saving modes include Idle mode, Power-down mode with RTC active, and Power-down mode.
Individual enable/disable of peripheral functions as well as peripheral clock scaling for additional power optimization.
Processor wake-up from Power-down and Deep power-down (Revision A and higher) mode via external interrupt or RTC.

No comments:

Post a Comment